News

Do you know the repair tips for forklift solid tires that are degummed or broken?

1. Hot patching: File the roughness around the damaged inner tube, stick the fire patch on the damaged area, and make the hole just in the patch, then install the patch clip against the normalizing patch, and tighten it. Press the screw and then ignite the heating agent on the fire repair glue, and wait for 10-15 minutes to bond tightly.

​​

2. When the inner tube is found to have small holes, it can be hot or cold.

​​

3. Outer tire: If the outer tire has cracks, holes, blistering, delamination and other damages, it should be repaired or overhauled according to the specific situation. If there are continuous cracks around the tire carcass, the tread rubber has been polished and there are large holes, the carcass line layer has annular cracks and the whole circle is separated, it should be replaced.

​​

4. Raw rubber patching (cold patching): file rough around the inner tube break, apply raw glue, and then apply secondary glue after the surface of the glue is slightly dry. When the glue is air-dried, attach the prepared raw rubber to the broken On the mouth, pressurize and heat at 140-145 ° C, keep warm for 10-20 minutes to vulcanize the raw rubber, and after cooling, it can be tightly bonded.