News

The carcass of a solid tire is solid. No rope is used as a skeleton, no inflation is required, so no inner tube or seal is required. The early tire company was a solid tire. Solid tires are generally used under high loads, which requires the compound to have sufficient pressure resistance and wear resistance, high modulus stress, high hardness, low deformation, and good wear resistance.

Solid tire is an industrial tire suitable for running and managing vehicles under different conditions of low speed and high load. Its safety, durability and economy are obviously better than pneumatic tires. It can be widely used in various electronic industries Social vehicles, military vehicles, construction machinery, towed vehicles in ports and airports, etc.

Solid tires often need to be transported during production. Due to the heavy weight of the solid tires used in large vehicles, they cannot be transported manually at all. Therefore, in general, mechanical operations are used. In order to prevent tire surface damage, hooks or chains cannot be used for loading and unloading. At present, many factories use forklifts for loading and unloading, which has low loading and unloading efficiency and high cost.

The handling technology of solid tires is used to assist the construction of teaching facilities for classification and handling. The operating system buttons and operating gear levers in the box can be controlled as described above to control the research machine to move to the designated position, and then the turntable rotates and the said control problem according to the control problem. The length adjustment motor starts and develops to drive the front and rear of the cross bar. The application of China Mobile makes the company's fixed plate reach the top of the tire that the company needs to improve handling. Adjust the length of the piston rod of the cylinder through the market to adjust the position of the suction cup to reach the tire. Above the smooth surface of the tread, the hydraulic support rod shrinks so that the suction cup is lowered and adsorbed on the surface of the tire, and then the hydraulic support rod extends to suck up the tire and place it in a designated place.